The basis for service life and performance - curing After coating, it is important to let the coating cure for a certain time. The curing time depends on the temperature and the humidity. The warmer it is, the faster a coating dries. The colder it is, the longer it will take to harden. A hall or garage is particularly recommended for the first night and for the actual coating! NEO WAX “Ceramic Seals” / Coatings need at approx. 15 ° C approx. 24-48 hours after the coating for the first 80% hardening. The remaining 20% curing takes place within 1-2 weeks after coating. If it is colder it takes much longer (at least factor 2). When it is warmer, drying is much faster. If dirt gets on the car during this time, it should be removed as quickly as possible. Above all, bird droppings, tree sap and hard water (watch out for water stains) should be removed directly. You should also avoid automatic washing systems, modeling clay or polishes / abrasive washing, e.g. with sponges or brushes. If it is absolutely necessary, then it is worth choosing the washing system carefully, the gentler the better. General tips for hand washing Method 1: rinse-free washing, rinse less wash [hand washing] This method is safe and easy. And also very environmentally friendly as it saves water. In about 15 minutes you will get a nice result. Rinseless wash works when the car isn't too dirty. This means that the wheel arches and sills shouldn't be too dirty. Otherwise it will quickly become tedious. If the car is very dirty, it would be better to use a different car wash method. And this is how it works: Avoid washing your car in direct sunlight. It is more ideal to wash your car early in the morning or in the late afternoon when the sun is not at its hottest. This makes your work easier and prevents products from drying out on the paint. Hard water is particularly tricky in coated cars. Because the water beading effect forms drops. These drops are round and therefore have a small contact area on the paint. In the water pearls, the minerals and the lime are concentrated in a small point. If these points can dry quickly in the heat of the sun and remain on the paint, then this is a danger for the coating and the paint. Because these points can harden and must be removed with an acidic cleaner and must not be burned in under any circumstances. Use neutral shampoos for normal (little soiling) care. Avoid shampoos that contain waxes or silicone. These waxes partly smear the coating and make the beading worse. A method for in between, the rinse less wash, is particularly interesting for people without a water connection. if you are interesting then click more detail about car coating and pacmobiledetailing
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |